Ford F-Series Keyless Entry Remote Fobs
How to Program a Ford F-Series Keyless Fob
- Insert the key into the ignition.
- Cycle the ignition from OFF to RUN (engine off) 8 times within ten seconds, ending in the RUN position. (engine off)
- The power door locks should cycle to indicate program mode.
- Press any button on the fob to program, the power door locks should cycle to indicate successful programming. Repeat for additional fobs.
- Turn the ignition off to exit program mode.
NOTE: This procedure will work for F-150, F-250, F-350, F-450.
