1996 ford f150
9:07 amSeptember 2, 2009
JD
how do you program the remote which pins do you have to jump
8:30 amSeptember 19, 2009
Mike
posts 71
There should be a two-wire programming connector under the dash, near the steering column. It is connected to the RKE control module. You have to jump those two wires.
Guest Name (Required):
Guest Email (Required):
NOTE: New Posts are subject to administrator approval before being displayed
Guest URL (required)
Math Required! What is the sum of: 7 + 8
Print this Post 
